|
Ethanol Fuel grade quality specification (99.6% Ethanol)
|
1 |
Ethanol content |
v/v, % |
≥99.6 |
≥95.0 |
EN 2870 Appendix 2 Method |
2 |
Hyper saturated unit (including other alcohols of C3-C5) |
v/v, % |
≤2.0 |
≤2.0 |
EN 2870 Method III |
3 |
Methanol |
v/v, % |
≤0.5 |
≤0.3 |
EN 2870 Method III |
4 |
Dissolved washing colloid |
mg/100ml |
≤5.0 |
≤4.0 |
ASTM D 381 |
5 |
Water |
wt, % |
≤0.3 |
≤4.5 |
ASTM E 203 |
6 |
Abio chloride |
mg/L |
≤20 |
≤15 |
ASTM D 512 |
7 |
Copper |
mg/kg |
≤0.07 |
≤0.05 |
ASTM D 1688 |
8 |
Acid (based on acetic acid) |
mg/L |
≤30 |
≤20 |
ASTM D 1613 |
9 |
pH |
|
6.5-9.0 |
6.0-9.0 |
ASTM D 6423 |
10 |
Conductivity |
µS/cm |
≤500 |
≤500 |
ASTM D 1125 |
11 |
Inorganic chlorine(based on Clˉ) |
mg/L |
- |
≤32 |
|
12 |
Appearance |
|
Clear and transparent |
Clear and transparent |
Visual |
13 |
With/without additive |
|
Energy sources department |
Energy sources department |
|
|
|
|
|
LABORATORY TEST REPORT FUSEL OIL
|
VOLATILITY |
|
|
|
-Flash Point: PMCC (°C) |
ASTM D-93 |
report |
38 |
FLOW PROPERTIES |
|
|
|
-Pour Point (°C) |
ASTM D-97 |
report |
-27 |
-Viscosity @50°C (Kinematic) cSt. |
ASTM D-445 |
report |
1.72 |
-API Gravity @ 15.6 °C |
ASTM D-4052 |
report |
36.6 |
-Density @ 15.0 °C g/mL |
ASTM D-4053 |
report |
0.8413 |
CLEANLINESS |
|
|
|
-Sulfur Content %wt. |
ASTM D-4294 |
report |
<0.01 |
-Carbon Residue %wt. |
ASTM D-4530 |
report |
0.004 |
-Ash Content %wt. |
ASTM D-482 |
report |
0.005-15 |
-Water and Sediment %vol. |
ASTM E-1064 |
report |
|
COMBUSTION |
|
|
|
-Gross Heat of Combusion cal/g |
ASTM D-4868 |
report |
11,003 |
|
|
|
|
Biogas Specification
|
1 |
Biogas amount (as per design basis) |
m3/day @ 35°C |
≥117000 (Based on Max load to IC reactor) |
2 |
Yield of CH4 |
m3/kgCODb treated in IC reactor @ 35°C |
≥0.39 |
3 |
% CH4 |
% |
≥75 |
1 |
tCODer |
mg/l |
<120 |
2 |
BOD5 |
mg/l |
<20 |
3 |
TSS |
mg/l |
<50 |
4 |
TKN |
mg/l |
<100 |
5 |
pH |
mg/l |
6-9 |
|
|
|
|
Solid Specification from Stillage
|
Water |
80 |
pH |
4.5 |
Organic |
14.6 |
Coarse fiber |
7.1 |
Protein |
2.34 |
Fat |
0.92 |
N |
0.32 |
P |
0.03 |
K |
0.03 |
|
|
|
|
This was a test result from solid separated from decanter,using tapioca as raw material
Project Confirmation for Starch Mill Plant 200 T/D 7 Plants
|
1 |
Finished product
Fine Crushing Cake |
|
|
|
|
|
Starch contents |
%w/w |
63 |
|
|
Solid contents |
%w/w |
65 |
|
|
Protein |
%w/w |
<0.3 |
|
|
Fiber |
%w/w |
<0.2 ml/50mg |
|
|
Impurity |
%w/w |
<1 |
|
|
Hydrocyanic Contents |
ppm/%w/w |
<10 |
|
|
SO2 Contents |
ppm/%w/w |
<300 |
|
|
Partical Size |
mm |
38-50 micron |
|
|
pH |
|
5-7 |
|
|
Moisture contents of product |
% |
35 |
|
|
Moisture contents of plup |
% |
70 |
|
|
Temperature |
°C |
30 |
|
|
|
|
| |